Prep your two wheeler for the rains!

Nobody understands the pain of monsoon like two wheeler owners. There’s nothing enjoyable about riding around being completely soaked. But what’s worse than being unprotected from the rain while commuting is that your two wheeler is unshielded from the damage of the monsoon too.

Riding a two wheeler gets significantly more risky during the rains. Here are a few important and basic monsoon bike prep tips that will help you brave through the season.

Check the Tyres

The splashes of rain bring with it mud, muck and wet roads that are hard to get a grip on. One of the first things you need to do this monsoon is to check the condition of your tyres. It’s important that your tires have deep treads as they disperse water and provide the needed grip to avoid road accidents.

If your tires are old, replace them. Don’t forget to clean the mud off of the grooves before it dries up.

Lubricate the Chain

Potholes and puddles are a natural byproduct of the monsoons. You must ensure that your bike’s chain is cleaned frequently. After every 500 kms, use grease or engine oil to lubricate it, as the rain water tends to wash away the lubricant.

Clean the Engine

The engine in bikes is usually exposed and this can be a cause for concern during the rains. Make sure to clean the mud off of the engine. While you should do this soon so that the mud doesn’t dry, you should also be careful because the engine is usually hot after a ride.

Service Your Brake Pads

An important part of monsoon care for bikes is taking care of their brakes for enhanced two wheeler safety. Whether you bike has disc or drum brakes, rainwater tends to reduce their efficiency. You have to ensure that your brake pads are serviced frequently during the wet months. Remember not to brake too hard, because on wet roads that means uncontrollable skidding.